?WikiName? - Souls Modding Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== BehaviorParam ======
===== Fields =====
^ Field ^ Type ^ Offset ^ Description ^ Notes ^
| disableParam_NT | ''u8'' | ''0x0 [0]'' | Exclude from the NT version or mark the ones to be excluded. | This field is a boolean. |
| disableParam_Product | ''u8'' | ''0x0 [1]'' | Exclude from the product version or mark the items to be excluded. | This field is a boolean. |
| disableParamReserve1 | ''dummy8'' | ''0x0 [2-7]'' |  | This field is padding. |
| disableParamReserve2 | ''dummy8'' | ''0x1'' |  | This field is padding. |
| variationId | ''s32'' | ''0x4'' | Used when calculating the ID for attack parameters. It is not used directly on the actual machine. |  |
| behaviorJudgeId | ''s32'' | ''0x8'' | Used when calculating the ID for attack parameters. This ID matches the action judgment ID entered in TAE. |  |
| ezStateBehaviorType_old | ''u8'' | ''0xc'' |  |  |
| refType | ''u8'' | ''0xd'' | Which param type to reference for attack behavior. | This field uses the following enum: BEHAVIOR_REF_TYPE |
| consumeSA | ''s16'' | ''0xe'' | Set the amount of Poise consumed during action |  |
| refId | ''s32'' | ''0x10'' | ID of param to use for attack behavior. Param used determined by refType | This field refers to the following params: [[ac6-refmat:param:AtkParam|AtkParam_Pc]], [[ac6-refmat:param:AtkParam|AtkParam_Npc]], [[ac6-refmat:param:Bullet]], [[ac6-refmat:param:SpEffectParam]] |
| sfxVariationId | ''s32'' | ''0x14'' | Offset applied to the particle ID invoked in the TAE event |  |
| stamina | ''s16'' | ''0x18'' | Set the amount of stamina consumed during action |  |
| energy | ''s16'' | ''0x1a'' | Set the amount of energy consumed during action |  |
| mp | ''s32'' | ''0x1c'' | Set the amount of MP consumed during action |  |
| category | ''u8'' | ''0x20'' | The SpEffect category this behavior belongs to | This field uses the following enum: BEHAVIOR_CATEGORY |
| heroPoint | ''u8'' | ''0x21'' | Set the amount of humanity consumed during action |  |
| pad1 | ''dummy8'' | ''0x22'' |  | This field is padding. |
| shootDmyPolyId | ''s32'' | ''0x24'' | The starting ID in a range of Dummy Polygons used for shooting. |  |
| shootEndDmyPolyId | ''s32'' | ''0x28'' | The ending ID in a range of Dummy Polygons used for shooting. |  |
| shootAngle | ''s16'' | ''0x2c'' | Specifies how far forward the projectile should be fired. In degrees. |  |
| shootAngleInterval | ''s16'' | ''0x2e'' | When firing multiple projectiles, specify the interval at which to fire. (Y axis). In degrees. |  |
| shootAngleXZ | ''s8'' | ''0x30'' | Additional elevation angle from horizontal. In degrees. |  |
| bUseNumShootBullet | ''u8'' | ''0x31 [0]'' | Consumes bullets for several times when fired simultaneously | This field is a boolean. |
| isSequenceShootWhenSameTimeShoot | ''u8'' | ''0x31 [1]'' | When firing sequentially using multiple dummy polys, are bullets fired at the same time considered to be fired sequentially? | This field is a boolean. |
| isShootAngOffsetDisable | ''u8'' | ''0x31 [2]'' | When OFF, offset is also applied to the shooting angle; when ON, offset is disabled. | This field is a boolean. |
| pad2 | ''dummy8'' | ''0x31 [3-7]'' |  | This field is padding. |
| pad3 | ''dummy8'' | ''0x32'' |  | This field is padding. |
| shootAngleXInterval | ''s16'' | ''0x34'' | When firing multiple projectiles, specify the interval at which to fire.(X-axis). In degrees. |  |
| shootAngleZ | ''s16'' | ''0x36'' | Specifies how many times to rotate in the Z-axis direction when launching a projectile. In degrees. |  |
| shootAngleZInterval | ''f32'' | ''0x38'' | When firing multiple projectiles, specify the interval at which to fire (Z-axis). In degrees. |  |
| bulletRollAngleZ | ''s16'' | ''0x3c'' | Additional angle in drilling direction (Z axis). In degrees. |  |
| bulletRollAngleZInterbal | ''s16'' | ''0x3e'' | When firing multiple projectiles, specify the interval at which to fire (Z-axis). In degrees. |  |
| bulletRollAngleZRandom | ''f32'' | ''0x40'' | Upper limit of firing torsion angle random number (0 to 360) |  |
| shootTargetXOffset | ''f32'' | ''0x44'' | Left and right offset of impact position. Shifts the target position left and right during firing and homing. In metres. |  |
| targetYOffsetRange | ''f32'' | ''0x48'' | Vertical offset of impact position. Shifts the target position up and down during firing and homing. In metres. |  |
| shootTargetZOffset | ''f32'' | ''0x4c'' | Front and rear offset of impact position. Shifts the target position forward and backward during firing and homing. |  |
| numShoot | ''u8'' | ''0x50'' | Number of bullets produced per cartridge (emitter). Does not affect ammo consumption |  |
| numContinueShoot | ''u8'' | ''0x51'' | Number of times to fire continuously. The total number of bullets fired is the number of simultaneous shots x the number of consecutive shots. |  |
| cupsleRotationDeg | ''s16'' | ''0x52'' | Rotation angle of horizontal capsule. In degrees. |  |
| shootInterval | ''f32'' | ''0x54'' | Number of seconds between shots when firing continuously |  |
| reloadTimeSecond | ''f32'' | ''0x58'' | Interval between one shot and the next shot |  |
| targetZOffsetRange | ''f32'' | ''0x5c'' | Forward and backward offset of the impact position for curved shots. Shifts the target position toward the front or back during firing and homing. In metres. |  |
| targetXOffsetRange | ''f32'' | ''0x60'' | Left and right offset of the impact position for curved shots. Shifts the target position toward the front or back during firing and homing. In metres. |  |
| bTargetAutoOffset | ''u8'' | ''0x64'' | Should you use automatic target position offset? | This field is a boolean. |
| pad4 | ''dummy8'' | ''0x65'' |  | This field is padding. |
| targetAutoOffsetBaseDmyPolyId | ''s16'' | ''0x66'' | Reference dummy poly ID used in target position automatic offset |  |
| pa_DrainVal | ''u16'' | ''0x68'' | Set the amount of pulse armor consumed during action |  |
| pad5 | ''dummy8'' | ''0x6a'' |  | This field is padding. |
| pa_OverwriteDelayTimeSec | ''f32'' | ''0x6c'' | Amount to override Pulse Armor recovery time (-1 means no override) |  |
| consumeBulletNum | ''s32'' | ''0x70'' | Number of ammunition consumed when an attack occurs |  |
| recoilBlurAddVal | ''f32'' | ''0x74'' | Attack recoil blur accumulation amount |  |
| lockTimeSec | ''f32'' | ''0x78'' | Time to secondary lock. In seconds. |  |
| maxMissileLockNum | ''u8'' | ''0x7c'' | Maximum number of missile locks |  |
| shootEnableLockNum | ''u8'' | ''0x7d'' | If the lock count number is less than the specified value, firing will not be possible. |  |
| pad6 | ''dummy8'' | ''0x7e'' |  | This field is padding. |
| HdPadRumble_Atk_Id | ''s16'' | ''0x80'' | Vibration ID for haptic feedback |  |
| HdPadRumble_Hit_Id | ''s16'' | ''0x82'' | Impact vibration ID for haptic feedback |  |
| HdPadRumble_Priority | ''u8'' | ''0x84'' | Playback priority for haptic feedback (0 is low priority, 10 is high priority) |  |
| pad7 | ''dummy8'' | ''0x85'' |  | This field is padding. |
| shotgunParamId | ''s32'' | ''0x88'' | Shot Control parameter to use. | This field refers to the following params: [[ac6-refmat:param:BulletShotgunParam|BulletShotgunParam_PC]], [[ac6-refmat:param:BulletShotgunParam|BulletShotgunParam_NPC]] |
| shotgunBaseDist | ''f32'' | ''0x8c'' | Diffusion reference distance |  |
| heat_AddValue | ''f32'' | ''0x90'' | Heat value accumulated with each bullet |  |
| targetShotgunParamId | ''s32'' | ''0x94'' | Offset calculation for target position | This field refers to the following params: [[ac6-refmat:param:BulletShotgunParam_PC]], [[ac6-refmat:param:BulletShotgunParam_NPC]] |
| chargeDelayTimeSec | ''f32'' | ''0x98'' | Delay time until charging starts after referring to action parameters. In seconds. |  |
| continueShootConsumeBulletMaxTimeSec | ''f32'' | ''0x9c'' | Maximum time of bullets consumed by continuous consumption. In seconds. |  |
| continueShootConsumeBulletMaxNum | ''s32'' | ''0xa0'' |  |  |
| continueShootAddHeatMaxTimeSec | ''f32'' | ''0xa4'' | Maximum amount of heat accumulated through continuous consumption. In seconds. |  |
| continueShootAddHeatMaxValue | ''s32'' | ''0xa8'' | Maximum amount of heat accumulated through continuous consumption |  |
| lockCountUpTimeSec | ''f32'' | ''0xac'' | Missile lock count up time (lock time from 2nd lock). In seconds. |  |
| pad_end | ''dummy8'' | ''0xb0'' |  | This field is padding. |



===== Enums =====


==== BEHAVIOR_REF_TYPE ====
^ Option ^ Description ^ Notes ^
| ''0'' | Attack | |
| ''1'' | Bullet | |
| ''2'' | SpEffect | |


==== BEHAVIOR_ATK_STYLE ====
^ Option ^ Description ^ Notes ^
| ''0'' | Normal | |
| ''1'' | Charge | |
| ''2'' | 2H Normal | |
| ''3'' | 2H Charge | |
| ''4'' | Weak | |
| ''5'' | Guard | |
| ''6'' | Parry | |
| ''7'' | Close Range | |
| ''8'' | Long Range | |
| ''9'' | 2H Close Range | |
| ''10'' | 2H Long Range | |
| ''11'' | After Parry | |


==== BEHAVIOR_ATK_TYPE ====
^ Option ^ Description ^ Notes ^
| ''0'' | Slash | |
| ''1'' | Blow | |
| ''2'' | Thrust | |
| ''3'' | Explosion | |
| ''4'' | Bullet | |


==== BEHAVIOR_CATEGORY ====
^ Option ^ Description ^ Notes ^
| ''0'' | None | |
| ''1'' | Normal Attack | |
| ''2'' | Left-hand Attack | |
| ''3'' | Magic | |
| ''4'' | Miracle | |
| ''5'' | Body | |
| ''6'' | Enemy Attack 1 | |
| ''7'' | Enemy Attack 2 | |
| ''8'' | Enemy Attack 3 | |
| ''9'' | Kick | |
?WikiName? - Souls Modding Wiki

User Tools

Site Tools

Page Tools
